The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Difference between revisions of "CHIP"
(→Processors: A15) |
(→Processors) |
||
Line 33: | Line 33: | ||
* [[T8101]] (A14 Bionic): 0x8101 |
* [[T8101]] (A14 Bionic): 0x8101 |
||
* [[T8110]] (A15 Bionic): 0x8110 |
* [[T8110]] (A15 Bionic): 0x8110 |
||
+ | * [[T8120]] (A16 Bionic): 0x8120 |
||
== [[Recovery Mode]] string == |
== [[Recovery Mode]] string == |
Revision as of 02:06, 8 September 2022
The CHIP tag is a 16-bit unsigned integer (uint16_t
) that denotes the type of chip the firmware is to be installed to. It is one of the few tags that is not read from the fuses, being hardcoded in the bootchain. It is used to prevent [supposedly] incompatible firmwares from being installed. A firmware is truly incompatible if it uses instructions only available on newer processors.
Processors
- S5L8900: 0x8900
- S5L8920: 0x8920
- S5L8922: 0x8922
- S5L8930 (A4): 0x8930
- S5L8940 (A5): 0x8940
- S5L8942 (A5 Rev A): 0x8942
- S5L8945 (A5X): 0x8945
- S5L8947 (A5 Rev B): 0x8947
- S5L8950 (A6): 0x8950
- S5L8955 (A6X): 0x8955
- S5L8960/S5L8965 (A7): 0x8960
- T7000 (A8): 0x7000
- T7001 (A8X): 0x7001
- S7002 (S1): 0x7002
- S8000 (A9 Samsung): 0x8000
- S8001 (A9X): 0x8001
- T8002 (S1P, S2, T1): 0x8002
- S8003 (A9 TSMC): 0x8003
- T8004 (S3): 0x8004
- T8006 (S4 & S5): 0x8006
- T8010 (A10 Fusion): 0x8010
- T8011 (A10X Fusion): 0x8011
- T8012 (T2): 0x8012
- T8015 (A11 Bionic): 0x8015
- T8020 (A12 Bionic): 0x8020
- T8027 (A12X Bionic): 0x8027
- T2002 (H1): 0x8194
- T8030 (A13 Bionic): 0x8030
- T8301 (S6): 0x8301
- T8101 (A14 Bionic): 0x8101
- T8110 (A15 Bionic): 0x8110
- T8120 (A16 Bionic): 0x8120
Recovery Mode string
If you connect a device in Recovery Mode to your computer, there is a small section in the device's USB "serial number" that contains the CPID, among other information.