Difference between revisions of "Recovery Mode"

From The iPhone Wiki
Jump to: navigation, search
(link)
m
Line 1: Line 1:
 
Recovery Mode is a failsafe in [[iBoot]] that is used to reflash the device with a new OS, whether the currently installed one is somehow damaged or the device is undergoing an upgrade via [[iTunes]].
 
Recovery Mode is a failsafe in [[iBoot]] that is used to reflash the device with a new OS, whether the currently installed one is somehow damaged or the device is undergoing an upgrade via [[iTunes]].
  +
  +
Information about [[Recovery Mode (Protocols)|Recovery Mode's protocols]] is available.
   
 
== Entering Recovery Mode ==
 
== Entering Recovery Mode ==
  +
[[Image:Recovery Mode.jpg|thumb|right|iPhone in Recovery Mode.]]
 
# Turn the device completely off and disconnect it from cable/dock.
 
# Turn the device completely off and disconnect it from cable/dock.
 
# Hold down the home button.
 
# Hold down the home button.
 
# While holding down the home button connect to a computer with a cable (easiest) or dock.
 
# While holding down the home button connect to a computer with a cable (easiest) or dock.
# Keep holding down the home button until you see a "Connect to [[iTunes]]" screen [[Image:Recovery_Mode.jpg|thumb|right|iPhone in Recovery Mode.]] (on a [[PwnageTool|pwned]] phone a drawing of Steve might be shown). You are now in recovery mode.
+
# Keep holding down the home button until you see a "Connect to [[iTunes]]" screen (on a [[Pwnage|pwned]] phone a drawing of Steve might be shown). You are now in recovery mode.
   
 
To escape Recovery Mode and power the phone off simply hold down power and home buttons for ten seconds.
 
To escape Recovery Mode and power the phone off simply hold down power and home buttons for ten seconds.
   
If that fails, attempt to set the Boot Environments back to default.
+
If that fails, attempt to set the boot environments back to default.
 
==Protocols==
 
*[[Recovery Mode 0x1280]] in pre-2.0
 
*[[Recovery Mode 0x1281]] in 2.0 and above
 

Revision as of 16:51, 25 August 2010

Recovery Mode is a failsafe in iBoot that is used to reflash the device with a new OS, whether the currently installed one is somehow damaged or the device is undergoing an upgrade via iTunes.

Information about Recovery Mode's protocols is available.

Entering Recovery Mode

iPhone in Recovery Mode.
  1. Turn the device completely off and disconnect it from cable/dock.
  2. Hold down the home button.
  3. While holding down the home button connect to a computer with a cable (easiest) or dock.
  4. Keep holding down the home button until you see a "Connect to iTunes" screen (on a pwned phone a drawing of Steve might be shown). You are now in recovery mode.

To escape Recovery Mode and power the phone off simply hold down power and home buttons for ten seconds.

If that fails, attempt to set the boot environments back to default.