The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information.

Difference between revisions of "IRecovery"

From The iPhone Wiki
Jump to: navigation, search
(New page: iRecovery is a client to communicate with various modes of the iPhone via USB. ==DFU 2.0 (0x1227)== It can upload a file, such as an iBSS, so that you can unplug and spawn a shell with 0x...)
 
m
 
(63 intermediate revisions by 22 users not shown)
Line 1: Line 1:
  +
{{DISPLAYTITLE:iRecovery}}
−
iRecovery is a client to communicate with various modes of the iPhone via USB.
  
  +
iRecovery is a libusb-based CLI utility for Mac OS X, Linux, and Windows. It is able to talk to [[iBoot (Bootloader)|iBoot]] and [[iBSS]] and [[iBEC]] via USB. It's completely open source; the source code is released under the terms of the GNU GPL v3. The full license text can be found in the LICENSE file on github.
  +
Please note that there is no official compiled version available.
   
  +
It currently connects to:
−
==DFU 2.0 (0x1227)==
  
  +
* [[DFU 0x1227|0x1227]] ([[DFU Mode]]/[[WTF]] Mode 2.0)
−
It can upload a file, such as an iBSS, so that you can unplug and spawn a shell with 0x1281.
  
  +
* [[Recovery Mode (Protocols)#Recovery_Mode_2.x_.28DevID.3D0x1281.29|Recovery Mode 0x1281]] (Recovery Mode/iBSS/iBEC)
   
  +
==Credits==
−
==Recovery 2.0 (0x1281)==
  
  +
westbaer
−
You can either send a file to 0x9000000 with ./iRecovery -f file, or you can spawn a shell with two way communication by issuing ./iRecovery -s
  
  +
  +
==Thanks==
  +
[[User:Pod2g|pod2g]], [[tom3q]], [[User:Planetbeing|planetbeing]], [[User:Geohot|geohot]] and [[User:posixninja|posixninja]].
  +
  +
==Features==
  +
  +
===DFU 2.0 (0x1227)===
  +
It can upload a file, such as an [[iBSS]], so that you can unplug and spawn a shell with 0x1281.
  +
  +
===Recovery 2.0 (0x1281)===
  +
====File Uploading====
  +
You can upload a file to 0x9000000 with the following syntax:
  +
./iRecovery -f file
  +
In newer builds that use libusb-1.0 this is now
  +
./iRecovery -u file
  +
  +
====Two-Way Shell====
  +
You can spawn a shell to do all sorts of neat things with the syntax:
  +
./iRecovery -s
  +
Once it has spawned, you can type 'help' and iBoot will respond with its built-in command list.
  +
  +
====Single Command====
  +
./iRecovery -c "command"
  +
Sends a single command to the device *without* spawning a shell.
  +
  +
====usb_control_msg(0x21, 2) Exploit Command====
  +
./iRecovery -k
  +
Sends Chronic Dev's + Geohot's latest usb exploit. Implemented into blackra1n.
  +
This was updated near {{date|2009|10|17}}. [http://github.com/posixninja/irecovery posixninja's fork]
  +
In newer builds this is now -e
  +
  +
====Auto Boot====
  +
You can now enable auto-boot by running:
  +
./iRecovery -a
  +
or by sending /auto-boot in a shell.
  +
  +
In newer builds it is now:
  +
./iRecovery -n
  +
  +
====USB Reset====
  +
Reset USB
  +
./iRecovery -r
  +
  +
====Batch Scripting====
  +
iRecovery now supports batch scripting, this allows you to send commands to iBoot from a pre written list of commands, this also supports scripting such as /auto-boot and /upload <file>
  +
./iRecovery -b <file>
  +
or in a shell:
  +
/batch <file>
  +
  +
====Raw Commands====
  +
You can now send raw commands via the -x21 -x40 or -xA1 flags
  +
  +
==Example Output==
  +
  +
iRecovery -s
  +
======================================
  +
::
  +
:: iBSS for n82ap, Copyright 2009, Apple Inc.
  +
::
  +
:: BUILD_TAG: iBoot-596.24
  +
::
  +
:: BUILD_STYLE: RELEASE
  +
::
  +
:: USB_SERIAL_NUMBER: CPID:8900 CPRV:30 CPFM:03 SCEP:05 BDID:04 ECID:000003293C113D76 IBFL:00
  +
::
  +
=======================================
  +
  +
Entering recovery mode, starting command prompt
  +
] printenv
  +
build-style = "RELEASE"
  +
build-version = "iBoot-596.24"
  +
config_board = "n82ap"
  +
loadaddr = "0x9000000"
  +
boot-command = "fsboot"
  +
bootdelay = "0"
  +
auto-boot = "true"
  +
idle-off = "true"
  +
boot-device = "nand0"
  +
boot-partition = "0"
  +
boot-path = "/System/Library/Caches/com.apple.kernelcaches/kernelcache.s5l8900x"
  +
display-color-space = "RGB888"
  +
display-timing = "optC"
  +
framebuffer = "0xfd00000"
  +
secure-boot = "0x1"
  +
  +
== Supported Raw Commands ==
  +
  +
Currently Supported by All Firmware:<br>
  +
Reboot - Reboots Iphone
  +
  +
More IBoot Commands Information:<br>
  +
http://code.google.com/p/chronicdev/wiki/iBootCommands
  +
  +
NOTE: 'bgcolor' appears to be no longer supported -- requires confirmation.
  +
  +
==Forks==
  +
[http://github.com/iH8sn0w/irecovery iH8sn0w/irecovery]
  +
  +
[http://github.com/GreySyntax/irecovery GreySyntax/irecovery]
  +
  +
==Updates==
  +
* A C++ port is also in the works dubbed iRecovery++ (by [[User:GreySyntax|GreySyntax]]) can be found at [http://github.com/NSPwn/iRecoveryplusplus GitHub/NSPwn/iRecoveryplusplus]
  +
* [https://www.openjailbreak.org/projects/libirecovery-2-0/repository libiRecovery 2.0 in development by OpenJailBreak.org]
  +
* A VB.NET GUI port for Windows has been made under the name [[GiRecovery|Zeratul]].
   
 
==Download==
  
==Download==
  +
*[https://github.com/Chronic-Dev/libirecovery Chronic-Dev - libiRecovery (Mac OS X | Linux | Windows)]
−
[http://chronicdev.googlecode.com/svn/ Latest version always in the Chronic Dev SVN]
  
  +
*[https://github.com/GreySyntax/iRecoveryplusplus GreySyntax - iRecovery++ (Mac OS X| Linux | Windows (Possibly))]
  +
  +
  +
Note: Source only.
  +
  +
[[Category:Hacking Software]]

Latest revision as of 14:05, 17 September 2021

iRecovery is a libusb-based CLI utility for Mac OS X, Linux, and Windows. It is able to talk to iBoot and iBSS and iBEC via USB. It's completely open source; the source code is released under the terms of the GNU GPL v3. The full license text can be found in the LICENSE file on github. Please note that there is no official compiled version available.

It currently connects to:

Credits

westbaer

Thanks

pod2g, tom3q, planetbeing, geohot and posixninja.

Features

DFU 2.0 (0x1227)

It can upload a file, such as an iBSS, so that you can unplug and spawn a shell with 0x1281.

Recovery 2.0 (0x1281)

File Uploading

You can upload a file to 0x9000000 with the following syntax: 

./iRecovery -f file

In newer builds that use libusb-1.0 this is now 

./iRecovery -u file

Two-Way Shell

You can spawn a shell to do all sorts of neat things with the syntax: 

./iRecovery -s

Once it has spawned, you can type 'help' and iBoot will respond with its built-in command list.

Single Command

./iRecovery -c "command"

Sends a single command to the device *without* spawning a shell.

usb_control_msg(0x21, 2) Exploit Command

./iRecovery -k

Sends Chronic Dev's + Geohot's latest usb exploit. Implemented into blackra1n. This was updated near 17 October 2009. posixninja's fork In newer builds this is now -e

Auto Boot

You can now enable auto-boot by running: 

./iRecovery -a

or by sending /auto-boot in a shell.

In newer builds it is now: 

./iRecovery -n

USB Reset

Reset USB 

./iRecovery -r

Batch Scripting

iRecovery now supports batch scripting, this allows you to send commands to iBoot from a pre written list of commands, this also supports scripting such as /auto-boot and /upload <file> 

./iRecovery -b <file>

or in a shell: 

/batch <file>

Raw Commands

You can now send raw commands via the -x21 -x40 or -xA1 flags

Example Output

iRecovery -s 

======================================
::
:: iBSS for n82ap, Copyright 2009, Apple Inc.
::
:: BUILD_TAG: iBoot-596.24
::
:: BUILD_STYLE: RELEASE
::
:: USB_SERIAL_NUMBER: CPID:8900 CPRV:30 CPFM:03 SCEP:05 BDID:04 ECID:000003293C113D76 IBFL:00
::
=======================================
 
Entering recovery mode, starting command prompt
] printenv
build-style = "RELEASE"
build-version = "iBoot-596.24"
config_board = "n82ap"
loadaddr = "0x9000000"
boot-command = "fsboot"
bootdelay = "0"
auto-boot = "true"
idle-off = "true"
boot-device = "nand0"
boot-partition = "0"
boot-path = "/System/Library/Caches/com.apple.kernelcaches/kernelcache.s5l8900x"
display-color-space = "RGB888"
display-timing = "optC"
framebuffer = "0xfd00000"
secure-boot = "0x1"

Supported Raw Commands

Currently Supported by All Firmware:
Reboot - Reboots Iphone

More IBoot Commands Information:
http://code.google.com/p/chronicdev/wiki/iBootCommands

NOTE: 'bgcolor' appears to be no longer supported -- requires confirmation.

Forks

iH8sn0w/irecovery

GreySyntax/irecovery

Updates

Download


Note: Source only.

Retrieved from "https://www.theiphonewiki.com/w/index.php?title=IRecovery&oldid=117147"