Difference between revisions of "BORD"

From The iPhone Wiki
Jump to: navigation, search
(iPhone5,2 BDID is 2; iPhone5,1 BDID is 0. cf. https://ipsw.me/iPhone5,2/info and https://ipsw.me/iPhone5,1/info)
m
Line 176: Line 176:
 
** [[iPhone 6s]]: 0x04
 
** [[iPhone 6s]]: 0x04
 
** [[iPhone 6s Plus]]: 0x06
 
** [[iPhone 6s Plus]]: 0x06
** [[iPhone SE]]: 0x02
+
** [[iPhone SE (1st generation)]]: 0x02
 
** [[iPhone 7]]
 
** [[iPhone 7]]
 
*** [[D10AP|iPhone9,1]]: 0x08
 
*** [[D10AP|iPhone9,1]]: 0x08

Revision as of 13:55, 26 May 2020

The Board ID of a device (also known as BORD, BDID, or ApBoardId) is a 6-bit value (although usually represented as uint8_t) that represents multiple characteristics of the logic board. In a BuildManifest, this value is found in the ApBoardId tag.

Board ID Characteristics

The following table charts each of a Board ID's 6 bits to known board characteristics.

Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Meaning ? ? ? Eureka/Karoo Form Factor Production Type
Values ? ? ?
  • 0: Eureka
  • 1: Karoo
  • 0: Form Factor 'A'
  • 1: Form Factor 'B'
  • 0: Production (MLB)
  • 1: Development (DEV)

Devices