Bootrom

Summary

The bootrom (called "SecureROM" by Apple) is the first significant code that runs on an iDevice. The bootrom is read-only. Finding exploits in the bootrom level is a big achievement since Apple won't be able to fix it without a hardware revision.

Old & New bootrom

Certain models, including the iPod touch 2G and iPhone 3GS, have different bootrom versions. These are most commonly referred to with the terms "old bootrom" and "new bootrom." These "new bootrom" devices were released after 9 September 2009 and have the 0x24000 Segment Overflow fixed. While the new bootrom revisions have an exploit, the exploit needs the assistance of a firmware-based exploit to achieve an untethered jailbreak.

You might also be looking for Apple's stage 2 bootloader, which also uses the "iBoot" name.

Usually also looking at the CPRV (Chip Revision) tag will also tell you whether the device is new unit or not also.

Finding bootrom version

From the model number (iPod touch 2G)

If the second character of your Model Number is "B" (e.g.- FB533, MB533, or PB533), your iPod has the old bootrom. If the second character is "C" (FC086, MC086 or PC086), your iPod has the new bootrom.

From the serial number (iPhone 3GS)

The third digit of the serial number identifies the year of manufacture (9=2009, 0=2010), while the fourth and the fifth indicate the week. The first "new bootrom" devices are from week 40 of 2009 (??940?????? or higher serials). Any iPhone made after Week 45 of 2009 (??945?????? and higher or ??0???????? serials) has the new bootrom.

From the DFU Device descriptors (all devices except S5L8900)

Windows

1. Connect Device & Enter DFU Mode
2. Open Device Manager, find USB controller, subitem Apple Mobile Device USB Driver
3. Right-Click & click Properties
4. Go to Details tab & select Device Instance Path in the dropdown box
5. The end of the info string will show the bootrom version

Mac OS X

1. Connect Device & Enter DFU Mode
2. Go to System Profiler, and under the Hardware category, go to USB, and click on Apple Mobile Device (DFU Mode)
3. The end of the Serial Number string will show the bootrom version in brackets (ie: [iBoot-574.4])

Linux

1. Make sure your distribution has usbutils installed. (most distributions have it by default)
2. Connect Device & Enter DFU Mode
3. In terminal, run sudo lsusb -v
4. Find the line that says iSerial and your bootrom version will be at the end of the line.

Dumping the bootrom

You can use Bootrom Dumper Utility by pod2g to dump the bootrom on devices that are vulnerable to the limera1n exploit.

Bootrom Exploits

• Pwnage 1.0 (Ramdisk + AppleImage2NORAccess) up to Rev.2
• Pwnage 2.0 (DFU + Malformed Certificate) up to Rev.2
• 0x24000 Segment Overflow up to 240.4/359.3
• usb_control_msg(0xA1, 1) Exploit (also called "steaks4uce" exploit) only for 240.4 and 240.5.1
• Limera1n Exploit up to 574.4
• SHAtter up to 574.4

Revisions

• Bootrom Rev.2 in S5L8900
• Bootrom 240.4 in S5L8720 (old version only)
• Bootrom 359.3 in S5L8920 (old version only)
• Bootrom 240.5.1 in S5L8720 (new version only)
• Bootrom 359.3.2 in S5L8920 (new version only)
• Bootrom 359.5 in S5L8922
• Bootrom 574.4 in S5L8930
• Bootrom 838.3 in S5L8940
• Bootrom ???.? in S5L8942
• Bootrom 1062.2 in S5L8945
• Bootrom 1145.3 in S5L8950

S5L8900, used in the iPhone 2G, iPod touch 1G, and iPhone 3G

see also VROM (S5L8900)

• Bootrom Rev.2

S5L8720, used in the iPod touch 2G

• Bootrom 240.4 "old bootrom"
• Bootrom 240.5.1 "new bootrom"

S5L8920, used in the iPhone 3GS

• Bootrom 359.3 "old bootrom"
• Bootrom 359.3.2 "new bootrom"

S5L8922, used in the iPod touch 3G

• Bootrom 359.5

S5L8930, used in the iPad 1G, iPhone 4, Apple TV 2G and iPod touch 4G

• Bootrom 574.4

S5L8940, used in the iPad 2 and iPhone 4S

• Bootrom 838.3

S5L8942, used in the iPad 2 (Wi-Fi) [R2] and Apple TV 3G

•  ?

S5L8945, used in the iPad 3

• Bootrom 1062.2

S5L8950, used in the iPhone 5

• Bootrom 1145.3