The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information.

Difference between revisions of "BORD"

From The iPhone Wiki
Jump to: navigation, search
(→‎Devices: Newer Devices.)
Line 7: Line 7:
 
** [[J33IAP|Apple TV 3G (AppleTV3,2)]]: 0x00
  
** [[J33IAP|Apple TV 3G (AppleTV3,2)]]: 0x00
 
** [[J42dAP|Apple TV 4G]]: 0x34
  
** [[J42dAP|Apple TV 4G]]: 0x34
−
* [[Apple Watch]]
 +
* [[Apple Watch (1st generation)]]
−
** [[N27aAP|Apple Watch 38mm (Watch1,1)]]: 0x02
 +
** [[N27aAP|Apple Watch (1st generation) 38mm (Watch1,1)]]: 0x02
−
** [[N28aAP|Apple Watch 42mm (Watch1,2)]]: 0x04
 +
** [[N28aAP|Apple Watch (1st generation) 42mm (Watch1,2)]]: 0x04
 
* [[Apple Watch Series 1]]
  
* [[Apple Watch Series 1]]
 
** [[N27dAP|Apple Watch Series 1 38mm (Watch2,6)]]: 0x02
  
** [[N27dAP|Apple Watch Series 1 38mm (Watch2,6)]]: 0x02

Revision as of 19:59, 21 March 2017

The BORD (BOaRD) tag is an 8-bit unsigned integer (uint8_t) that contains the Board ID of the device that the firmware image is supposed to be ran on. It allows Apple to make sure you are not running another device's firmware files on an incompatible device, probably to prevent using old exploits. What is odd about this tag is that the same values have been used many times. It can be found in the BuildManifest.plist inside an IPSW next to ApChipID.

Devices

Tango Utilities-terminal.png This firmware article is a "stub", an incomplete page. Please add more content to this article and remove this tag.
Retrieved from "https://www.theiphonewiki.com/w/index.php?title=BORD&oldid=56170"