|
The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Difference between revisions of "Recovery Mode"
m (Not necessarily QuickPwn nowadays. ;)) |
(included the existing image) |
||
| Line 5: | Line 5: | ||
# Hold down the home button. |
# Hold down the home button. |
||
# While holding down the home button connect to a computer with a cable (easiest) or dock. |
# While holding down the home button connect to a computer with a cable (easiest) or dock. |
||
| − | # Keep holding down the home button until you see a "Connect to [[iTunes]]" screen (on a pwned phone a drawing of Steve might be shown). You are now in recovery mode. |
+ | # Keep holding down the home button until you see a "Connect to [[iTunes]]" screen [[Image:Recovery_Mode.jpg|thumb|right|iPhone in Recovery Mode.]] (on a pwned phone a drawing of Steve might be shown). You are now in recovery mode. |
To escape Recovery Mode and power the phone off simply hold down power and home buttons for ten seconds. |
To escape Recovery Mode and power the phone off simply hold down power and home buttons for ten seconds. |
||
Revision as of 13:14, 4 August 2010
Recovery Mode is a failsafe in iBoot that is used to reflash the device with a new OS, whether the currently installed one is somehow damaged or the device is undergoing an upgrade via iTunes.
Entering Recovery Mode
- Turn the device completely off and disconnect it from cable/dock.
- Hold down the home button.
- While holding down the home button connect to a computer with a cable (easiest) or dock.
- Keep holding down the home button until you see a "Connect to iTunes" screen (on a pwned phone a drawing of Steve might be shown). You are now in recovery mode.
To escape Recovery Mode and power the phone off simply hold down power and home buttons for ten seconds.
If that fails, attempt to set the Boot Environments back to default.
Protocols
- Recovery Mode 0x1280 in pre-2.0
- Recovery Mode 0x1281 in 2.0 and above
