|
The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Difference between revisions of "CHIP"
DanTheMann15 (talk | contribs) m (add the A13 Bionic to this list.) |
|||
| Line 29: | Line 29: | ||
* [[T8027]] (A12X Bionic): 0x8027 |
* [[T8027]] (A12X Bionic): 0x8027 |
||
* [[T2002]] (H1): 0x8194 |
* [[T2002]] (H1): 0x8194 |
||
| + | * [[T8030]] (A13 Bionic): 0x8030 |
||
== [[Recovery Mode]] string == |
== [[Recovery Mode]] string == |
||
Revision as of 20:37, 21 October 2019
The CHIP tag is a 16-bit unsigned integer (uint16_t) that denotes the type of chip the firmware is to be installed to. It is one of the few tags that is not read from the fuses, being hardcoded in the bootchain. It is used to prevent [supposedly] incompatible firmwares from being installed. A firmware is truly incompatible if it uses instructions only available on newer processors.
Processors
- S5L8900: 0x8900
- S5L8920: 0x8920
- S5L8922: 0x8922
- S5L8930 (A4): 0x8930
- S5L8940 (A5): 0x8940
- S5L8942 (A5 Rev A): 0x8942
- S5L8945 (A5X): 0x8945
- S5L8947 (A5 Rev B): 0x8947
- S5L8950 (A6): 0x8950
- S5L8955 (A6X): 0x8955
- S5L8960/S5L8965 (A7): 0x8960
- T7000 (A8): 0x7000
- T7001 (A8X): 0x7001
- S7002 (S1): 0x7002
- S8000 (A9 Samsung): 0x8000
- S8001 (A9X): 0x8001
- T8002 (S1P, S2, T1): 0x8002
- S8003 (A9 TSMC): 0x8003
- T8004 (S3): 0x8004
- T8006 (S4): 0x8006
- T8010 (A10 Fusion): 0x8010
- T8011 (A10X Fusion): 0x8011
- T8012 (T2): 0x8012
- T8015 (A11 Bionic): 0x8015
- T8020 (A12 Bionic): 0x8020
- T8027 (A12X Bionic): 0x8027
- T2002 (H1): 0x8194
- T8030 (A13 Bionic): 0x8030
Recovery Mode string
If you connect a device in Recovery Mode to your computer, there is a small section in the device's USB "serial number" that contains the CPID, among other information.
