|
The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Difference between revisions of "Checkm8-a5"
m (→Instructions) |
m (newly broken link) |
||
| Line 20: | Line 20: | ||
== References == |
== References == |
||
| − | *[https://www.youtube.com/watch?v=3ZPaKAgujO8 Tutorial] |
||
*[https://www.appletech752.com/troubleshooting.html Troubleshooting] |
*[https://www.appletech752.com/troubleshooting.html Troubleshooting] |
||
Latest revision as of 14:22, 4 June 2022
| Original author(s) | a1exdandy, nyan_satan |
|---|---|
| Developer(s) | a1exdandy, nyan_satan, synackuk |
| Initial release | 18 Jun 2020 |
| Operating system | Windows, macOS, Linux |
| Website |
GitHub (original) GitHub (updated fork) |
checkm8-a5 is a tool based on the checkm8 Exploit that puts A5-based devices in pwned DFU Mode. The tool takes the form of an Arduino sketch, and requires an Arduino Uno with a USB Host Shield attached.
Requirements
The Arduino Uno used should be an OEM one, indicated by the PCB being green and having things like Arduino logos and "Made in Italy" text on it. A USB Host Shield must be attached to the Arduino so a device can be plugged in. On the opposite side of the shield from the reset button, an LED should be placed into the shield connector, with the negative end (short prong) being in the slot labeled "GND" and the positive end (long prong) being in the second slot from the right of the gap.
Instructions
Remove the -master suffix from the name of the checkm8-a5-master folder that the sketch is extracted to. In the Arduino program, load the checkm8-a5.ino sketch. In the third line of the sketch, make sure that the right CPID is written for the device you're pwning (the default is 8942). Go to the "Tools > Port" menu and select the port your Arduino is connected to. Upload the sketch to the Arduino, and when it's done, unplug the Arduino from your computer. Plug your device into the USB port on the USB Host Shield, then plug the Arduino back into your computer. The LED should blink three times, and when your device is pwned the LED should light up permanently.
