|
The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Difference between revisions of "DFU Mode"
(→Method 1 (True Hardware DFU)) |
(→How to Enter True Hardware DFU) |
||
| Line 7: | Line 7: | ||
# Turn off the device. |
# Turn off the device. |
||
# Hold the home and power buttons simultaneously to turn on. |
# Hold the home and power buttons simultaneously to turn on. |
||
| − | # Hold |
+ | # Hold both buttons for 10 seconds, then let the power button go. |
| + | # Keep the home button pressed until the screen flashes and stays "black" but lit. |
||
| − | If the Restore Logo is present on the screen, you are in Restore Mode, |
+ | If the Restore Logo is present on the screen, you are in Restore Mode, ''not DFU''. |
==Exiting DFU Without Restoring== |
==Exiting DFU Without Restoring== |
||
Revision as of 00:39, 12 August 2008
DFU or Device Firmware Upgrade mode allows the S5L8900 to be restored from any state. It resides in the VROM and is vulnerable to the pwnage 2.0 exploit.
Entering DFU
Software cannot be used to reliably enter DFU. Software methods rely on sending a WTF file which either calls the "real" DFU mode in bootrom or emulates it. If you are attempting to exploit the DFU, it is advisable to always use the hardware method. If your NOR firmware is corrupted, of course you have no recourse but to use the hardware method.
How to Enter True Hardware DFU
- Turn off the device.
- Hold the home and power buttons simultaneously to turn on.
- Hold both buttons for 10 seconds, then let the power button go.
- Keep the home button pressed until the screen flashes and stays "black" but lit.
If the Restore Logo is present on the screen, you are in Restore Mode, not DFU.
Exiting DFU Without Restoring
While in DFU, hold the power button for 30-60 seconds. When I have tested it, it has varied, so I don't know an exact length of time to hold it. Note that sometimes if you do this, when the device reboots from DFU, it will go into recovery mode for reasons unknown.
