BBUpdaterExtreme

From The iPhone Wiki
Revision as of 11:39, 27 July 2008 by Geohot (talk | contribs) (New page: This is the tool the 3G ramdisk uses to upgrade the baseband ==Output== Disabling thermal Notifications...OK Disabling sleep...OK Powering radio on through AppleBaseband Doing a hardware ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is the tool the 3G ramdisk uses to upgrade the baseband

Output

Disabling thermal Notifications...OK Disabling sleep...OK Powering radio on through AppleBaseband Doing a hardware reset through AppleBaseband Opening device path /dev/cu.debug, using initial baud 115200 Pinging modem...Ping timed out, trying again, 9 tries left Pinging modem...OK

               Firmware Version: ICE2-01.45.00
               EEP Version: EEP_VERSION:526
               EEP Revision: EEP_REVISION:0
               Boot Loader Version: ICE2_BOOT_05.08_G2M3S2
               FLS/EEP Mismatch: Match

Doing a hardware reset through AppleBaseband Configuring Hardware Mux...OK


BEGINNING BOOT

Sending boot code...OK Automagic-ing firmware from path ICE2_01.45.00.fls...

       - No compatible firmware files were found in ICE2_01.45.00.fls

Automagic-ing firmware from path ICE2_01.45.00.fls -- All OK

!!! Exception at :0:

       - BBUReturnAborted(8)/16: Automagic failed and can not perform update

Re-enabling thermal Notifications...OK Re-enabling sleep...OK