|
The iPhone Wiki is no longer updated. Visit this article on The Apple Wiki for current information. |
Ultrasn0w
Revision as of 21:39, 8 January 2009 by ChronicDev (talk | contribs)
The first iPhone 3G unlock payload. Released on 01/01/09. [1]
Contents
Credit
MuscleNerd, and The dev team
Exploit
Relies on an unsigned code injection vulnerability.
The actual unlock works by a daemon patching the baseband's RAM on-the-fly, overriding the carrier lock code. It is not permanent because of the signature checks - the bootloader has to pass the sigchecks and the baseband has to pass them too, so any change to the baseband/bootloader cannot be made.
Current Injection Vector
yellowsn0w refers to the reuseable payload, but it requires an injection vector in order to be inserted into the baseband. yellowsn0w was originally to be released with an injection vector that works on pre-2.28.00 baseband versions. However, geohot had an injection vector for 2.28.00 and the decision was made to release yellowsn0w with this injection vector to benefit the most people.
The injection vector is discussed here
Payload w/ Comments (by Darkmen) =
The exploit consists from 3 parts:
Code loader
ROM:00000000 ; =============== S U B R O U T I N E ======================================= ROM:00000000 ROM:00000000 ROM:00000000 loader ROM:00000000 LDR R2, =0x11700 ; unused ram to place code ROM:00000002 ADDS R4, R2, #1 ; thumb switch ROM:00000004 LDR R3, =0x40159FBF ; at-handler buffer where StrToHex result of the at-command is ROM:00000006 ROM:00000006 copy.loop ; CODE XREF: loader+12�j ROM:00000006 LDRB R0, [R3] ; copying code until double quotes ROM:00000008 CMP R0, #0x22 ; '"' ROM:0000000A BEQ run ; jump thumb code ROM:0000000C STRB R0, [R2] ROM:0000000E ADDS R2, #1 ROM:00000010 ADDS R3, #1 ROM:00000012 B copy.loop ; copying code until double quotes ROM:00000014 ; --------------------------------------------------------------------------- ROM:00000014 ROM:00000014 run ; CODE XREF: loader+A�j ROM:00000014 BX R4 ; jump thumb code ROM:00000014 ; End of function loader ROM:00000014 ROM:00000014 ; ---------------------------------------------------------------------------
Task creator
RAM:000119A0 ; =============== S U B R O U T I N E =======================================
RAM:000119A0
RAM:000119A0
RAM:000119A0 handler_replace
RAM:000119A0 LDR R0, =0x4011714C ; soft reset handler addr
RAM:000119A2 ADR R1, new_handler
RAM:000119A4 ADDS R1, #1 ; thumbing
RAM:000119A6 STR R1, [R0] ; setting new handler
RAM:000119A8 POP {R0-R4,PC} ; safe exit fixing stack
RAM:000119A8 ; End of function handler_replace
RAM:000119B0 ; =============== S U B R O U T I N E =======================================
RAM:000119B0
RAM:000119B0
RAM:000119B0 new_handler ; DATA XREF: handler_replace+2�o
RAM:000119B0 PUSH {R4-R7,LR}
RAM:000119B2 LDR R3, =0x403BB344 ; jamptable var
RAM:000119B4 MOVS R6, #0x80
RAM:000119B6 SUB SP, SP, #0x2C
RAM:000119B8 LSLS R6, R6, #4 ; 0x200
RAM:000119BA STRH R0, [R3] ; saving R0 to mem var
RAM:000119BC STR R1, [SP,#0x40+resp_string] ; saving responce prt to stack
RAM:000119BE LDR R4, =0x201420AC ; malloc
RAM:000119C0 ADDS R0, R6, #0
RAM:000119C2 BLX R4 ; malloc(0x200)
RAM:000119C4 MOVS R5, #0
RAM:000119C6 STR R0, [SP,#0x40+ptr_200] ; saving pointer to stack
RAM:000119C8 MOVS R0, #0x98 ; sizeof(NU_TASK)
RAM:000119CA BLX R4 ; malloc(0x98)
RAM:000119CC ADDS R7, R0, #0 ; R7 = task
RAM:000119CE STR R5, [R0,#0xC] ; task.field=0
RAM:000119D0 MOVS R0, 0x100
RAM:000119D4 BLX R4 ; malloc(0x100)
RAM:000119D6 MOVS R2, #0x80
RAM:000119D8 LDR R1, =task_loop ; src
RAM:000119DA LSLS R2, R2, #1 ; size to copy
RAM:000119DC LDR R3, =0x203C58A0 ; bytecpy
RAM:000119DE ADDS R4, R0, #0 ; R4 = dyn_task_loop
RAM:000119E0 BLX R3 ; bytecpy(task_loop, dyn_task_loop, 0x100)
RAM:000119E2 LDR R3, [SP,#0x40+ptr_200]
RAM:000119E4 STR R3, [SP,#4] ; void *stack_address = malloc(0x200)
RAM:000119E6 MOVS R3, #0x44
RAM:000119E8 STR R3, [SP,#0xC] ; priority = 0x44
RAM:000119EA MOVS R3, #0xA
RAM:000119EC ADDS R4, #1 ; thumbing dyn_task_loop
RAM:000119EE STR R3, [SP,#0x14] ; preempt = NU_PREEMPT
RAM:000119F0 MOVS R3, #0xC
RAM:000119F2 ADDS R2, R4, #0 ; void(*task_entry)
RAM:000119F4 STR R3, [SP,#0x18] ; auto_start = NU_START
RAM:000119F6 LDR R1, =devteam1 ; char *name
RAM:000119F8 STR R5, [SP] ; void *argv = 0
RAM:000119FA STR R6, [SP,#8] ; stack_size = 0x200
RAM:000119FC STR R5, [SP,#0x10] ; time_slice = 0
RAM:000119FE ADDS R0, R7, #0 ; NU_TASK *task
RAM:00011A00 MOVS R3, #0 ; int argc = 0
RAM:00011A02 LDR R4, =0x203FB540 ; NU_Create_Task
RAM:00011A04 BLX R4 ; status = NU_Create_Task()
RAM:00011A06 ADDS R2, R0, #0
RAM:00011A08 CMP R0, #0 ; success = zero
RAM:00011A0A BNE status_error
RAM:00011A0C LDR R1, =OK
RAM:00011A0E LDR R0, [SP,#0x40+resp_string]
RAM:00011A10 LDR R3, =0x2046DD00 ; sprintf
RAM:00011A12 BLX R3 ; sprintf(resp_string,"OK")
RAM:00011A14 B exit ; fixing stack
RAM:00011A16 ; ---------------------------------------------------------------------------
RAM:00011A16
RAM:00011A16 status_error ; CODE XREF: new_handler+5A�j
RAM:00011A16 LDR R1, =ERROR
RAM:00011A18 LDR R0, [SP,#0x40+resp_string]
RAM:00011A1A LDR R3, =0x2046DD00 ; sprintf
RAM:00011A1C BLX R3 ; sprintf(resp_string,"ERROR")
RAM:00011A1E
RAM:00011A1E exit ; CODE XREF: new_handler+64�j
RAM:00011A1E ADD SP, SP, #0x2C ; fixing stack
RAM:00011A20 POP {R4-R7,PC} ; bye
RAM:00011A20 ; End of function new_handler
RAM:00011A20
RAM:00011A20 ; ---------------------------------------------------------------------------
Unlock task loop
RAM:00011A64 ; =============== S U B R O U T I N E =======================================
RAM:00011A64
RAM:00011A64 task_loop ; DATA XREF: RAM:off_11A2C�o
RAM:00011A64 PUSH {R4,R5,LR}
RAM:00011A66 LDR R5, =0x40232754 ; sec mailbox
RAM:00011A68 SUB SP, SP, #0x14
RAM:00011A6A
RAM:00011A6A loop ; CODE XREF: task_loop+44�j
RAM:00011A6A LDR R3, =0x20165998 ; NU_Receive_From_Mailbox
RAM:00011A6C ADDS R0, R5, #0 ; NU_MAILBOX *mailbox
RAM:00011A6E MOV R1, SP ; void *Message
RAM:00011A70 MOVS R2, #0xFF ; Timeout
RAM:00011A72 BLX R3 ; NU_Receive_From_Mailbox(sec_mailbox,SP,0xFF)
RAM:00011A74 LDR R3, [SP] ; Message[0]
RAM:00011A76 CMP R3, #0xD ; Message[0] = 0xD ?
RAM:00011A78 BNE skip ;
RAM:00011A7A LDR R1, [SP,#4] ; Message[1]
RAM:00011A7C LDR R3, =0x402F79BC
RAM:00011A7E LDR R2, [R1] ; Message[1].field0
RAM:00011A80 STR R2, [R3] ; sec_task_var1 = Message[1].field0
RAM:00011A82 ADDS R3, #4 ; 0x402F79C0
RAM:00011A84 LDR R2, [R1,#4] ; Message[1].field1
RAM:00011A86 STR R2, [R3] ; sec_task_var2 = Message[1].field1
RAM:00011A88 LDR R2, [R1,#8] ; Message[1].field2
RAM:00011A8A LDR R3, =0x100FF00
RAM:00011A8C STR R3, [R2] ; Message[1].field2[0] = 0x100FF00
RAM:00011A8E LDR R3, =0x4020401
RAM:00011A90 STR R3, [R2,#4] ; Message[1].field2[1] = 0x4020401
RAM:00011A92 LDR R3, =0x4040403
RAM:00011A94 STR R3, [R2,#8] ; Message[1].field2[2] = 0x4040403
RAM:00011A96 MOVS R3, #1
RAM:00011A98 STR R3, [R1,#0xC] ; Message[1].field3 = 1
RAM:00011A9A MOVS R3, #0x20
RAM:00011A9C STR R3, [SP] ; Message[0] = 0x20
RAM:00011A9E
RAM:00011A9E skip ; CODE XREF: task_loop+14�j
RAM:00011A9E ADDS R0, R5, #0 ; sec mailbox
RAM:00011AA0 MOV R1, SP ; void *Message
RAM:00011AA2 MOVS R2, #0xFF ; timeout
RAM:00011AA4 LDR R3, =0x203ED568
RAM:00011AA6 BLX R3 ; NU_Send_To_Mailbox()
RAM:00011AA8 B loop ; NU_Receive_From_Mailbox
RAM:00011AA8 ; End of function task_loop
Source Code
The source code for yellowsn0w is now live [2]
Compatibility
| Country | Provider | yellowsn0w Version | SIM/USIM | Ingoing Calls? | Outgoing Calls? | SMS? | GPRS/EDGE? | UMTS/HSDPA? | Comments |
|---|---|---|---|---|---|---|---|---|---|
| Bermuda | Mobility | 0.9.5 | SIM | No | No | No | No | Not Available | Still stops working after a while of regular use :( |
| Germany | O2 | <=0.9.4 | SIM | Yes | Yes | Yes | Icon shown but not tested | Icon shown but not tested | |
| Israel | IL Orange | 0.9.5 | USIM | Yes | Yes | Yes | Yes | Yes | Requires turning airplane mode on and off to get signal. After that, works perfectly. |
Additional information: http://report.yellowsn0w.com/
